1. SCOPE This SAE Standard is intended to establish uniform methods for testing certain types of carbon steel and alloy steel tubing listed in 2.1.1. The specified test and performance criteria applicable to each variety of tubing are set forth in the respective SAE J Specifications. 2. REFERENCES 2.1 Applicable Publications The following publications form […]
This standard is issued under the fixed designation A 254; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (e) indicates an editorial change since the last revision or re-approval.
Low pressure gas/compressed natural gas tubes are made from single wall welded steel tubes, zinc plated and then coated with PVC to further isolate the atmospheric moisture. Tube: Single Wall ERW Steel Tube Size: OD 6 mm/8 mm, Wall 1 mm Surface Finish: Zinc plated + PVC Coating Protection Certification: ISO9001 & TS16949 20-30Mpa Pressure
Available for single wall ERW, and double wall brazed steel tubes. Copper coated both sides for double wall Bundy tube, while only outside or both sides optional for single wall ERW Bundy tubes.
OD： 3.18 mm – 15 mm Wall: 0.5mm – 1 mm Manufacture standard: Read More…
