Bundy Tubes

ASTM A254 Standard Specification for Copper-Brazed Steel Tubing

This standard is issued under the fixed designation A 254; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (e) indicates an editorial change since the last revision or re-approval. […]

ASTM A254 Standard Specification for Copper-Brazed Steel Tubing Read Post »

PVC Coated LPG CNG Tubes

Low pressure gas/compressed natural gas tubes are made from single wall welded steel tubes, zinc plated and then coated with PVC to further isolate the atmospheric moisture. Tube: Single Wall ERW Steel Tube Size: OD 6 mm/8 mm, Wall 1 mm Surface Finish: Zinc plated + PVC Coating Protection Certification: ISO9001 & TS16949 20-30Mpa Pressure

PVC Coated LPG CNG Tubes Read Post »

Copper Coated Bundy Tube

Available for single wall ERW, and double wall brazed steel tubes. Copper coated both sides for double wall Bundy tube, while only outside or both sides optional for single wall ERW Bundy tubes.

Copper Coated Bundy Tube Read Post »

Yellow Zinc Plated Double Wall Bundy Tube

OD： 3.18 mm – 15 mm Wall: 0.5mm – 1 mm Manufacture standard: Read More…

Yellow Zinc Plated Double Wall Bundy Tube Read Post »

3.18mm 1/8″ OD Double Wall Brazed Bundy Steel Tubing in Flat Coil – Soft Annealed

Manufactured with extra annealing process to get stable and lower mechanical properties. OD: 3.18 mm, 1/4 inch Wall thickness: 0.7 mm, 0.028″ Elongation: >35%

3.18mm 1/8″ OD Double Wall Brazed Bundy Steel Tubing in Flat Coil – Soft Annealed Read Post »

Application of Bundy Tubes in Car Steering System

The steering system of passenger cars includes steering booster, power steering pump, oil sump, and connecting tubes. Before the adoption of Bundy tubes, cold drawn steel tubes of Φ12×1 are used to connect the components. The allowable pressure of the fluid is 10MPa. The higher volume of the inside surface residue must be eliminated by

Application of Bundy Tubes in Car Steering System Read Post »

Sample – Certificate of Origin for Bundy Tubes

This is an sample of CO (Certificate of Origin) issued for a client who purchased Bundy tubes from us. In some countries and regions, CO is a helpful document for importers to minimize the tariff under certain trade agreements between the importing and exporting countries. The client’s information has been removed, considering that no inquiry

Sample – Certificate of Origin for Bundy Tubes Read Post »

OD 3/16" 4.76mm Zinc Plated Bundy Tube for Brake Line Tubing

Zinc Plated Bundy Tubes for Brake Lines Delivered

A trial order of 500 Coils of zinc plated Bundy tubes (brake lines) packed in coils were delivered on 26th November. Tube OD 3/16″, wall 0.028″, rolled to a coil from 25 ft length, packed on pallet and shipped via ocean liner. Click here to learn more about our brake line and related products.

Zinc Plated Bundy Tubes for Brake Lines Delivered Read Post »