All posts by: BundyTubes

About BundyTubes

Indian Standard – IS 8119 SPECIFICATION FOR COPPER BRAZED STEEL TUBING

0. FOREWORD 0.1 This Indian Standard was adopted by the Indian Standards Institution on 15 July 1976, after the draft finalized by the Steel Tubes, Pipes and Fittings Sectional Committee had been approved by the Structural and Metals Division Council. 0.2 There has been a long felt need for copper brazed steel tubes used specially in […]

Standards

How to Tell Double Wall Bundy Tubes from Single Wall Bundy Tubes

Many buyers are confused by names of the double wall and single wall Bundy tubes. Once a while one of our client who needed double wall Bundy tube, but the tubes he purchased from somewhere else were actually single wall tubes coated with copper both inside and outside. Buyers of Bundy tubes should firstly clearly […]

Tube Tech

SAE J1677 Tests and Procedures for Carbon Steel and Low Alloy Steel Tubing

1. SCOPE This SAE Standard is intended to establish uniform methods for testing certain types of carbon steel and alloy steel tubing listed in 2.1.1. The specified test and performance criteria applicable to each variety of tubing are set forth in the respective SAE J Specifications. 2. REFERENCES 2.1 Applicable Publications The following publications form […]

Standards

ASTM A254 Standard Specification for Copper-Brazed Steel Tubing

This standard is issued under the fixed designation A 254; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (e) indicates an editorial change since the last revision or re-approval. […]

Standards

PVC Coated LPG CNG Tubes

Low pressure gas/compressed natural gas tubes are made from single wall welded steel tubes, zinc plated and then coated with PVC to further isolate the atmospheric moisture. Tube: Single Wall ERW Steel Tube Size: OD 6 mm/8 mm, Wall 1 mm Surface Finish: Zinc plated + PVC Coating Protection Certification: ISO9001 & TS16949 20-30Mpa Pressure […]

Tube Products

Copper Coated Bundy Tube

Available for single wall ERW, and double wall brazed steel tubes. Copper coated both sides for double wall Bundy tube, while only outside or both sides optional for single wall ERW Bundy tubes.

Tube Products

Free Samples!

Worldwide Shipping

Contact Us Right Now!

×

Hello!

Please leave us a message and we shall be in touch with you as soon as possible.

 

× How can I help you?